Fiber Optic FBT Coupler1x2 Steel Tube Tripe window  Single

FBT splitter, or FBT coupler, is an optical splitter that uses the Fused Biconic Taper (FBT) technique. The FBT technique is a well known industry technology for splitting optical power and/or splitting wavelengths. The fused fiber coupler is created through a process of fusing two bare fibers like an “X” and pulling the fused section to achieve the desired optical characteristics. FBT couplers are fused in tree structures to combine optical splitting effects to create power ratio output of 1×N or 2×N, where “N” is the number of desired outputs

Mini PLC Splitter Blockless 900μm Singlemode

PLC splitters, are used to evenly divide one or two optical signals into multiple optical signals.

PLC splitters are passive optical devices that are widely used in Passive Optical Networks

(PON) by connecting to the Main Distribution Frame (MDF). FTTH and FTTx Networks such as

BPON, GPON, EPON, and xG EPON all utilize PLC Splitters in their design.

ABS Module PLC Splitter 2.0mm Singlemode

Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.

Pigtailed ABS splitter is most commonly used in the PON networks. It provides the complete protection for inner optical components and cable, as well as designed for the convenient and reliable installation, but its volume is relatively large. It's mainly used for various connection and distribution products(outdoor fiber distribution box) or network cabinets.

LGX Cassette Type PLC Splitter SC connector Singlemode

The standard LGX box PLC splitter provides a plug-and-play method for integration in the network, which eliminates any risks during installation. It eliminates the need for splicing machines on the field and there is no need for skilled personnel for deployment. The following figure shows 1x4 LGX PLC Splitter applied in the 1U rack chassis in GPON network.

FTTH Drop Fiber Optic Cables

FTTH drop cables are located on the subscriber end to connect the terminal of a distribution cable to a subscriber’s premises. They are typically small diameter, low fiber count cables with limited unsupported span lengths, which can be installed aerially, underground or buried. As it is used in outdoor, drop cable shall have a minimum pull strength of 1335 Newtons according to the industry standard. Fiber optic drop cables are available in many different types. The three most commonly used fiber drop cables include flat drop cable, figure-8 aerial drop cable and round drop cable.

Quality Fiber Optical Patch Cord with FC SC LC ST MPO connector

Fiber optic patch cords are available in multimode (OM1, OM2, OM3, OM4) and single-mode (OS2) fiber types, with a range of FC,SC, ST and LC connectors. Our premium option offers low insertion loss and custom length options.

PDLC Duplex Outdoor Waterproof Fiber Optical Patch Cord

PDLC connectors and required optical cables have become standard interface applications for 4G，5G and wireless base stations, such as remote wireless, optical fiber to antenna, etc. This product is not only suitable for these fields, but also for industrial, aerospace, national defense and other fields. The cable assembled by PDLC has been tested by salt spray. The waterproof grade reaches IP67. It is easy to install and transmit reliable data over a long distance under harsh environment.

G657A FTTH SC Drop Cable Patch Cord

FTTH Optical fiber patch cord is made up by optical communication unit, strengthen pieces and the sheath composition, that is put the optical communication unit in the middle, both sides parallel place two root non-metallic strengthen members or metal strengthening component phosphate steel wire, finally squeeze the black sheath into cable.